How to Install Hp Laserjet 2300 on Windows 7
Cannot install the printer Hp laserjet 1020
Original title: cannot install my printer 
I bougth a new computer with windows 7, I try to install my priter hp laserjet 1020 I have the instalation disk but the computer can not find the driver, so I download the driver from the web page hp, but also the computer cannot read o found when the web site hp say's it
Hi Michael,
In addition to the suggestion of Palcouk, follow these steps and check if they help.
Step 1:
After you download the drivers from the manufacturer's website, right-click on the Setup file and run as administrator.
Step 2:
Temporarily turn off UAC (User Account Control) and try to install the driver.
Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
Drivers download for HP LaserJet 1020 printer
Also, be sure to have a look at the installation procedure.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
Cannot install the printer HP 5600 Series on Windows 8
Original title: printer HP 5600 Series
I have a HP all in a 5600 printer that would not load on a new computer with Windows 8. I have to return the computer because I'm not buying a new printer?
Check the HP Web site to determine if the 5600 is compatible (pilot) with Windows 8.
Alison
Cannot install the printer. The print processor does not exist.
Windows 7 Enterprise 64 bit. I am able to install HP LaserJet printers but no virtual printer. I can not load the XPS from Windows printer or Print to OneNote. I also tried to load more than one PDF printer and none of them work. The error I keep gettig to "cannot install the printer. The print processor does not exist. »
Any ideas would be appreciated.
My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.
Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction. We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.
[Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]
You wanted to post this in case someone else ran into a similar problem.
This is what worked for me.
I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).
Step 1: Stop the print spooler service.
Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.
Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.
Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.
Step 5: Start the print spooler service.
Try to connect or install your net printer and it should work now.
I hope this work for all of you.
Cannot install the printer and windows update error 80070026
Original title: Registry Editor not work cannot install the printer
I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea. Norton Antivirus now after it has started.
Tried to install the dell printer after uninstalling all printers. I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
for example:C:/windows/log/cbs/cbs.log
I looked in the directory C find regedit.exe to rename, but was unable to find it. I found these if this can help.
Regedit.exe.4288.dmp
Regedit.exe.3280.dmp
Regedit.exe.2292.dmp
I also got error or popup that without running windows Explorer and then restart it. I can't install the printer as it pops up and I need to close the program.
also receive error installer that it is already running
install GUI is unresponsive
error code 80070026 during the installation of windows updates. I open without addons and updates are all to date.
I'm sorry that there is so much information and error codes. I think that all what concerns the corrupted files. Can you help solve c drive please.
Hello
1. What is the serial number and model of the printer?
2. What are the failed updates?
3 have there been any changes made on the computer before the show?
I suggest you try the steps to solve the problem with the installation of printer.
Method 1:
Run the Fixit and check if it helps.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
For more information, see the links:
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
Search for a printer, the manufacturer Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
I suggest you try the steps to fix the problem with Windows Update.
Method 2:
Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
http://support.Microsoft.com/kb/929135
Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.
Method 3:
Temporarily disable the security software.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
Method 4:
You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspx
For more information, please see the links.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 ( http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process
Hope this information is useful.
Cannot install the printer HP C4500 on Windows 7
Cannot install the printer HP C4500 on Windows 7 - printer installation disc only supported by xp and vista. What should I do?
Yes, your solution worked, and I was finally able to connect my C4500 printer as wireless. Thank you very much for your help!
Cannot install the printer. The print processor is not (winprint)
According to the scenario:
DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.
DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.
Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.
I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.
I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.
The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.
There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.
Is there anything I can do to get the job to the printer on DC2?
(And for those who ask why install on a domain controller, there is no member server in this site).
Thank you
Hello Josi,
Thanks for posting your question on the Microsoft community.
The question will be better suited to the audience of professionals on the TechNet forums.
I would recommend posting your query in the TechNet forums.
TechNet Forum
https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer
Thank you
I have trouble to install the printer HP laserjet P2055 on my Windows 7 HP pavilion
I have trouble to install the printer HP laserjet P2055 on my windows 7 HP pavilion
original title: installation problem
Local printers
To install a printer, the most common method is to connect directly to your computer. This is known as a local printer.
If your printer is a universal serial (USB) bus model, Windows should automatically detect and install it when you plug it in.
If it is an older model that connects using the serial or parallel, you may need to install manually.
To install the printer (add) a local
-
Click to open devices and printers.
-
Click Add a printer.
-
In the Add Printer Wizard, click Add a local printer.
-
Choose a printer port page, make sure you use a button existing port and the recommended printer port are selected and then click Next.
-
On the installation of the printer driver page, select the model and manufacturer of the printer, and then click Next.
-
If your printer is not listed, click Windows Update, and then wait while Windows searches for drivers additional.
-
If none is available and you have the installation CD, click disk, and then navigate to the folder where the printer driver. (For additional guidance, see the printer manual.)
-
-
Perform the steps in the wizard and then click Finish.
Tips
-
You can print a test page to make sure that the printer is working correctly. See print a test page.
-
If you have installed the printer, but it does not work, check the Web site of the manufacturer for troubleshooting driver or updated information.
-
My printer does not print.
It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.
First of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions.
Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
Open the printer Troubleshooter
Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.
For more information, visit the below mentioned link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Printer problems:
http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
Run the printer difficulty of:
http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT
You can see the below mentioned links.
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer
Then, try to update the printer driver on your computer. Sometimes printer problems come from out-of-date driver software, and can be solved by installing or reinstalling, the latest driver.
To find the latest driver for your printer, first check Windows Update, which is designed to detect the hardware connected to your computer and automatically notify you when new drivers are available:
-
Click to open Windows Update.
-
In the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.
-
If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
If you do not see a listed updated printer driver, it is always possible that there are: your printer manufacturer might not have provided to Microsoft yet.
Most printer manufacturers offer updated drivers on the sections of the support of their Web sites. Drivers are typically organized by edition and Windows printing model. When you have found the right driver, install it according to the instructions of the manufacturer. For more information, see update a hardware driver that is not working properly.
If your printer still does not work, see the support section of the website of the manufacturer of your printer for model-specific troubleshooting tips.
"Cannot install the printer. Operation could not be performed. error 0x000003eb.
I'm running Windows 7 (not Vista) and trying to install a Kodak printer driver and get "cannot install the printer. Operation could not be performed. error 0x000003eb"I searched constantly everyday for a fix. You have a solution other than what answers are already in this forum. I uninstalled and reinstalled tried wireless and usb, installation driver separately, tried to install it in safe mode, run now utility scan. I think that the problem began with an update of Windows 7 which has hung up and eventually having a corrupted file?
Hello
LaserJet P3010: Cannot install the printer. The print processor does not exist
I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...
Problem solved. Use another port.
Try to install the printer HP laserjet 1012
I just got a new computer with windows 7. I tried to install my printer HP laserjet printer HP laserjet 1012. I have the installation disc, but it does not work and the HP site does not list the drivers for this printer. I'm out of luck, or there at - it a way to install this printer. t works fine on windows XP
Users have reported that the Laserjet 1015 driver will work for 32-bit systems with the LJ 1012. In another forum users reported using the Laserjet 3055 PCL5 the 1012 Laserjet driver in x 64 systems.
Try to install the printer HP LaserJet 5if gives errror "operation could not be completed.
Win7 + HP LaserJet 5if
Hello, I have instaled windows 7 RC, and I try to add network printer HP LaserJet 5if.
Windows has been find printer, but when he tries to install the driver I see massage:
Printer driver has not been installed.
Operation could not be completed (error
0 x 0000002).
No idea which can change to install this printer?
Hi kkriss,
Thank you for using answers Forum.
The network printer is connected to a XP computer?
Are either using a 64-bit version of Windows?
I suggest visiting the manufacturer's Web site to see if they have Windows 7 drivers or at least Vista drivers.
I also propose to sign in as an administrator to install the printer.
Please let us know if that helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
I have windows 7 ultimate. Cannot install the printer hp psc software 2410. How to rectify
My laptop says cannot install the software. I tried all help. Unable to resolve.
Hello
According to the HP.com website, your printer driver is installed via Windows Update. The HP document that describes this process can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=303753&sw_lang=.
Basically, you need to leave the laptop to start the Add New Hardware Wizard. You can facilitate this by going to control panel, select devices and printers, and when this window opens, select Add a device. Make sure that your printer is connected to your computer via a USB cable, the printer, before to start the wizard.
Let me know if this helps you.
Kind regards
BearPup
I have an Emachine and a Brother printer, cannot install the printer
I have an Emachine with Vista, AVG security. Had a Brother printer. Printer has worked one day, wouldn't work next day. Computer won't let me uninstall or reinstall, nor can I do a backup now. Took and said it was the printer, the new printer, same story. What is going on. I am po'd when I call a number of aid and get some yahoo in India.
Hello
1. what exactly happens when you uninstall and reinstall the printer?
2. you get any error message?
3. how you try to install the printer drivers? (With the help of CD or by downloading the driver)
4. What is the number of the printer model?
5. What is the model number of the printer that you bought?
6. How are you trying to backup?
7. are you any errors during the backup?
Please see the article mentioned below.
http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001500/000009/faqp001509_000.html?reg=us&c=us&lang=en&prod=ql1060neus
Please download the removal of printer tool suitable for the model number of your printer
Click on the link below.
http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001400/000038/faqp001438_000.html?reg=us&c=us&lang=en&prod=ql1060neus&cat
Cannot install the printer wireless with error code 0 x 00000643
Original title: error0x00000643 on the installation of the printer
try to install printerget wireless to the final installation and getting the error 0 x 00000643. Windows Vista 64-bit
Hello
Thanks for posting your question in the Microsoft Community.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
(1) did you of recent changes to the computer before this problem?
(2) what is the brand and model of the printer?
Please follow the methods and mark the question below:
Method 1:
I suggest you to install the printer in clean boot mode.
You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
Method 2:
Install the latest drivers for the printer from the manufacturer's website and check if that helps.
OR
You can also uninstall the printer using the network browser and install it again.
To do this, follow these steps:
a. open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.
b. in the pane tasks, click view computers and devices.
c. find the printer and then right click on the printer to uninstall.
d. once the printer is uninstalled, reconnect the printer to the computer. The Plug-and-Play service begins to install the printer.
Reference:
Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
I hope that the information above helps you.
How to Install Hp Laserjet 2300 on Windows 7
Source: https://www.eehelp.com/question/cannot-install-the-printer-hp-laserjet-2300-on-windows-7/